Reader Comments

How to Maintain and Take Care of Plumbing Systems?

by Prince Gray (2020-02-04) -; A cardinal mistake is to take a home's plumbing system for granted, much like the electrical wiring system, engaged for lighting homes or running water motor pumps or water filters.

Usually, the homeowners respond when a major plumbing catastrophe hits them below their belts -- this approach is totally disastrous and is often money sapping.

Here are some tips to help you ensure your home's plumbing keeps running optimally and without much screeching.

Prevent clogs: Clogs form due to the accumulation of waste, debris, and dirt in water pumps, pipes, and other associated systems.

Clogged drains or choked pipes can be cleared using chemicals. But unfortunately, these products sometimes do more harm than good, eroding cast-iron drain-pipes, apart from not removing the clog completely, calling its repeated use. Hence, it would be better if you hire a plumber to snake the drain.

Moreover, as a precautionary measure you should never throw cooking oils, grease, fats, and butter down the drain.

However, clogs aren't the only nuisances. Backed-up water puts additional pressure on your waste-pipes, stressing them and cutting short their lifespan. So avoid plug-ups by restricting what goes down your drains; which means keeping food scraps out of kitchen sinks and drains, hair out of bathroom drains or plastic bits out of toilets. Apart from this, take measures to reduce rust formation in pipes and arrest mold growth.

Reduce Pressure: If you are using too high pressure water it will stress your pipes, increasing the chances of a leak drastically reducing the longevity of the plumbing system.

You can use a hose gauge to measure water pressure and see that it is within the prescribed limits, i. e. between 40 and 85 psi, by installing a pressure reducer

Use Water Softener:

If your water is very hard it can shorten your plumbing's lifespan. The naturally occurring minerals in hard water, usually magnesium or calcium, build up inside your pipes and throttle the flow, increasing the pressure, apart from corroding the joints and fittings. To deal with this problem you can install a water softener. If cost is not a factor, you can buy electronic softeners, which uses electromagnetic pulses to dissolve minerals, and don't add sodium to your water.

Keep Sewer Lines Clear:

If you have municipal sewers, then take the help of a plumber to snake out the sewage every few years avoiding messy sewage backups. If you have a septic system, get your tank pumped out every three to five years.

Other tips and suggestions:

● During winter remove hoses from outdoor spigots to prevent frozen water from cracking the pipes and causing a spillover.

● If you living in extremely cold regions, you should add pipe insulation to the plumbing, especially in cold parts of your house such as garages, basements, and crawl spaces to avoid frozen pipes.

● Never use an exposed pipe as a hanger rod for drying your clothes or for other purposes -- this enhances the risks of loosening joints and fasteners.

● Don't procrastinate.

Conclusion: A plumbing leak almost always starts off slow, but it can quickly get out of control. Hence timely maintenance and the use of good materials to get a lasting effect is essential.

One company which can help you in this space is WishKarma. It has the world's largest Building & Construction Materials searchable catalog having over 250,000 products; with products ranging from Water motor pump, motor pump, water filter for home, submersible motor price, pipes fittings and more.

Visit Wishkarma Website to take a look at their world-class master products. It is constantly bringing in new products to the platform along with consumer ratings, feedback, and comparisons. Wishkarma also lists local suppliers for all products in its catalog.

Wishkarma has the world's largest Building with plumbing products ranging from Water motor pump, motor pump, water filter for home, submersible motor price, pipes and fittings and more.